MPP Solar Charge inverter 1000W DC 12V,

MPPT 40A Max PV Input 500W / 102V

20A AC charger

All in one Hybrid System, 1012LV-MS

• • • 1000W 12V

    • 40A Solar Charge Controller

    • 20A Ac Charger

    • Supports up to 500W of Solar

    • Cannot be paralleled

This product includes a 1000W Solar Charge Inverter with 12V DC Power, a MPPT 40A Charge Controller and a 20A AC charger, it's all in ONE Hybrid Solar System.

Ideal for RV's , Cabins and homes with 12V battery power, can start your generator automatically / or j just switch over to utility power if battery runs low during poor daylight / night time. (and recharge the battery at the same time). Perfect for keeping your furnace/ electrical refrigerator running through the night without having to run the generator to keep the battery charged.

Features

• 110V / 120V adjustable output design for low voltage area like North America
• Pure sine wave inverter 1000W continuous
• 40A MPPT built-in solar charge controller
• Does not support parallel operations
• Selectable AC input volt range
• Programmable parameters
• 20A charging from AC Generator (must output appropriate power)
• This is not for grid tie, it is only for off-grid use
• Adjustable bulk & float charging voltage
• Genset starter dry contact
• Overload and short circuit protection
• Lightweight, easy to install
• FREE monitoring software
• LCD Display + LED indicators

ELECTRICAL SPECIFICATIONS
Max Continuous Power: 1000W
Parallel Capability: None
Input Voltage Range: 65~140VAC (Appliance mode), 95~140VAC (UPS mode)
Input/Output Frequency: 50Hz/60hz Auto sensing
Output Voltage: 110/120VAC±5% user selectable
Output Waveform: Pure Sine Wave
Peak Efficiency: 90%
Nominal DC Voltage: 12V
Max DC Voltage (battery): 15.5V
Transfer Time: <10ms (UPS mode), <20ms (Appliance mode)
Charging Mode: 3-stage
AC Recharging Current: 20A
No Load Power Consumption: <15W
Power Saving Mode: <5W

SOLAR CHARGER
Algorithm: MPPT
Max PV Input / Output: 500W
Max Charging Current: 40A
Max PV Input Voc: 102V
MPPT Range: 15V-80V
Standby Power: 2W

ENVIRONMENTAL / MECHANICAL SPECIFICATIONS
Operating/Storage Temp.: 0°C ~ 55°C / -15°C~ 60°C
Operating Humidity: 20~90%RH Non-Condensing
Dimension: 355*272*100mm (14 x 10.7 x 4")
Net Weight 6.5kg

PIP-LV Spec Sheet:

PIP-LV Spec

PIP-LV User Manual:

PIP-MS LV 1KVA 1-5KVA manual-20200318-min